INTEL DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH
WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH
WILL BE UNINTERRUPTED OR ERROR-FREE.

//****************************************************************
quartus-23.4-0.63-readme.txt
Readme file for Intel(R) Quartus(R) Prime 23.4 Patch 0.63
Copyright (C) Intel Corporation 2019 All right reserved.
Patch created on Jan. 2, 2025, 1:14 p.m.
Patch Case#: 15016638462
Patches included: 
Patches conflicted: 
Patch prerequisites: 

//****************************************************************

Description:

Patch# 0.63: 
 This patch is to fix the polarity inversion issue for HDMI RX PHY Intel FPGA IP. (Arria 10)

For user that want to enable this polarity inversion, they need to:
1) Apply patch
2) Generate design example
3) edit ./rtl/ip/nios/intel_hdmi_rx_phy.ip and set parameter based on their needs
4) regenerate the IP by clicking "generate HDL"
5) Compile the design
6) Run hardware

For user that already have the design example generated. You can directly skip to step 3. 




Caution - You must either have previously installed the
          Intel(R) Quartus(R) Prime 23.4 software or must
          install the Intel(R) Quartus(R) Prime 23.4 software
          before installing this patch. Otherwise, the patch will
          not be installed correctly and the Intel(R) Quartus(R) Prime
          software will not run properly.

Note:
<Patches included> - means this patch includes those patches. If you
    already installed those patches, you can safely install this new
    patch on top.
<Patches conflicted> - means this patch conflicts with those patches.
    If you have any of those patches installed, don't install this patch.
    Contact Intel for further support.